Air-Lock Tire Lube and Bead Seal Material Safety Data Sheet (MSDS)
Date prepared: August 3, 2010
Section 1: Chemical Product and Company Information
Manufacturer: International Marketing, Inc.
25 Penncraft Avenue, Suite C
P.O. Box 2002
Chambersburg, PA 17201
Information Telephone: (717) 264-5819 (General Information)
Emergency Telephone: (800) 233-7086 (International Marketing Offices)
United States EST 8 A.M. – 5 P.M.
Product name: Air Lock Tire Lube and Bead Seal
Intended Use: Water-based tire bead lubrication product
C.A.S. Number No classification- mixture.
*The preparation is not dangerous according to directive 1999/45/EC
Section2: Hazards Identification
POTENTIAL HEALTH EFFECTS
EYE CONTACT: Contact with eyes may cause irritation and possible permanent damage to eye tissue.
SKIN CONTACT: Frequent or prolonged contact may cause irritation, dermatitis, or redness.
INHALATION: High vapor concentrations may be irritating to the eyes and respiratory tract may cause headaches, dizziness, or drowsiness.
INGESTION: Ingestion of this product may cause abdominal discomfort, nausea, cramps, and other related symptoms.
R-PHRASES: R 36/38
Section 3: Composition/ Information on Ingredients
Ingredients CAS EC Weight Percentage Range
Propylene glycol 57-55-6 200-388-0 1-5
Fillers Proprietary proprietary 1-2
Corrosion inhibiting additives Proprietary proprietary 1-2
Section 4: First Aid Measures
EYE CONTACT: Flush eye with copious amounts of water until irritation subsides. If irritation persists, get medical attention.
SKIN CONTACT: Wash with large amounts of water, use soap if available.
INHALATION: Remove affected victim from exposure and bring them into fresh air.
INGESTION: If swallowed DO NOT induce vomiting. Keep at rest. Seek prompt medical attention.
Section 5: Fire-Fighting Measures
Flashpoint: >300F (149C) (Modified Open Cup Method)
Flammable limits in air: Not established
Autoignition temperature: Not established
NFPA Rating: H 1 F 1 R 0
Extinguishing Media: Use water fog, foam or dry chemical extinguishing media.
Fire Fighting: Use water spray to cool fire exposed surfaces and to protect personnel.
Firefighters should be equipped with self-contained breathing apparatus and turn out gear.
No unusual decomposition products are produced under fire conditions.
Section 6: Accidental Release Measures
Contain spill. Absorb product on inert material, shovel into appropriate container, and dispose with in accordance with local, state, and federal regulations. Prevent material from entering waterways. See section 8 for personal protective equipment while cleaning up the spill.
Section 7: Storage and Handling
Keep container closed when not in use. Handle and open containers with care. Store in a cool, well-ventilated place away from excessive heat.
Avoid contact with skin and eyes.
Empty containers should not be reused unless thoroughly cleaned of product residues.
Section 8: Exposure Controls/ Personal Protection
Personal Protective Equipment
Protective gloves should be worn to prevent prolonged or repeated skin contact.
Chemical goggles or Safety glasses with side shields should be worn to prevent eye contact with spills or splashes.
Section 9: Physical and Chemical Properties
Specific Gravity (Water = 1.0) 1.00-1.01
Solubility in water (%) >90
Odor Citronella-like
Appearance Thick blue-gray liquid
pH 9.0 – 10.0
Section 10: Stability and Reactivity
Stability: Stable.
Hazardous Polymerization: Will not occur.
Incompatible Materials: Strong oxidizers.
Hazardous Decomposition: May produce harmful vapors upon combustion.Page 4 of 5 Air Lock Tire Lube and Bead Seal MSDS
Section 11: Toxicological Information
Please refer to Section 2 of this MSDS for available information on the potential health effects of this product.
Section 12: Ecological Information
No specific ecological data is available for this product. Refer to section 6 of this MSDS for information regarding accidental releases.
Section 13: Disposal Considerations
Follow federal, state, and local regulations. Alright to discharge with sewer operator’s permission.
Section 14: Transport Information
Freight Description:
Liquid latex paint, NOI, NMFC 149980 sub 2
This product is non-hazardous and non-regulated by DOT.
Section 15: Regulatory Information
TSCA: This product’s components are listed on the EPA’s TSCA
Inventory or are exempt from notification requirements.
SARA 313: This product contains the following Section 313 Reportable Ingredients: None
SARA 311 Categories: Immediate (Acute) Health Effects: Yes (See section 2 for details)
Delayed (Chronic) Health Effects: None determined
Fire Hazard: No
Sudden Release of Pressure Hazard: No
Section 16: Other Information
Hazardous Materials Identification System Ratings:
H 1 F 1 R 0 PP ___
|
